Pod Priority and Preemption
- The version name is vX where X is an integer.
- Stable versions of features will appear in released software for many subsequent versions.
Pods can have priority. Priority indicates the importance of a Pod relative to other Pods. If a Pod cannot be scheduled, the scheduler tries to preempt (evict) lower priority Pods to make scheduling of the pending Pod possible.
- How to use priority and preemption
- How to disable preemption
- Non-preempting PriorityClass
- Pod priority
- Interactions between Pod priority and quality of service
- What's next
In a cluster where not all users are trusted, a malicious user could create Pods at the highest possible priorities, causing other Pods to be evicted/not get scheduled. An administrator can use ResourceQuota to prevent users from creating pods at high priorities.
See limit Priority Class consumption by default for details.
How to use priority and preemption
To use priority and preemption:
Add one or more PriorityClasses.
Create Pods with
priorityClassNameset to one of the added PriorityClasses. Of course you do not need to create the Pods directly; normally you would add
priorityClassNameto the Pod template of a collection object like a Deployment.
Keep reading for more information about these steps.
Note: Kubernetes already ships with two PriorityClasses:
system-node-critical. These are common classes and are used to ensure that critical components are always scheduled first.
If you try the feature and then decide to disable it, you must remove the
PodPriority command-line flag or set it to
false, and then restart the API
server and scheduler. After the feature is disabled, the existing Pods keep
their priority fields, but preemption is disabled, and priority fields are
ignored. If the feature is disabled, you cannot set
priorityClassName in new
How to disable preemption
Caution: Critical pods rely on scheduler preemption to be scheduled when a cluster is under resource pressure. For this reason, it is not recommended to disable preemption.
Note: In Kubernetes 1.15 and later, if the feature
NonPreemptingPriorityis enabled, PriorityClasses have the option to set
preemptionPolicy: Never. This will prevent pods of that PriorityClass from preempting other pods.
Preemption is controlled by a kube-scheduler flag
disablePreemption, which is
false by default.
If you want to disable preemption despite the above note, you can set
This option is available in component configs only and is not available in old-style command line options. Below is a sample component config to disable preemption:
apiVersion: kubescheduler.config.k8s.io/v1alpha1 kind: KubeSchedulerConfiguration algorithmSource: provider: DefaultProvider ... disablePreemption: true
A PriorityClass is a non-namespaced object that defines a mapping from a
priority class name to the integer value of the priority. The name is specified
name field of the PriorityClass object’s metadata. The value is
specified in the required
value field. The higher the value, the higher the
The name of a PriorityClass object must be a valid
DNS subdomain name,
and it cannot be prefixed with
A PriorityClass object can have any 32-bit integer value smaller than or equal to 1 billion. Larger numbers are reserved for critical system Pods that should not normally be preempted or evicted. A cluster admin should create one PriorityClass object for each such mapping that they want.
PriorityClass also has two optional fields:
globalDefault field indicates that the value of this PriorityClass should
be used for Pods without a
priorityClassName. Only one PriorityClass with
globalDefault set to true can exist in the system. If there is no
globalDefault set, the priority of Pods with no
priorityClassName is zero.
description field is an arbitrary string. It is meant to tell users of the
cluster when they should use this PriorityClass.
Notes about PodPriority and existing clusters
If you upgrade your existing cluster and enable this feature, the priority of your existing Pods is effectively zero.
Addition of a PriorityClass with
truedoes not change the priorities of existing Pods. The value of such a PriorityClass is used only for Pods created after the PriorityClass is added.
If you delete a PriorityClass, existing Pods that use the name of the deleted PriorityClass remain unchanged, but you cannot create more Pods that use the name of the deleted PriorityClass.
apiVersion: scheduling.k8s.io/v1 kind: PriorityClass metadata: name: high-priority value: 1000000 globalDefault: false description: "This priority class should be used for XYZ service pods only."
- The version names contain alpha (e.g. v1alpha1).
- Might be buggy. Enabling the feature may expose bugs. Disabled by default.
- Support for feature may be dropped at any time without notice.
- The API may change in incompatible ways in a later software release without notice.
- Recommended for use only in short-lived testing clusters, due to increased risk of bugs and lack of long-term support.
PreemptionPolicy: Never will be placed in the scheduling queue
ahead of lower-priority pods,
but they cannot preempt other pods.
A non-preempting pod waiting to be scheduled will stay in the scheduling queue,
until sufficient resources are free,
and it can be scheduled.
like other pods,
are subject to scheduler back-off.
This means that if the scheduler tries these pods and they cannot be scheduled,
they will be retried with lower frequency,
allowing other pods with lower priority to be scheduled before them.
Non-preempting pods may still be preempted by other, high-priority pods.
PreemptionPolicy defaults to
which will allow pods of that PriorityClass to preempt lower-priority pods
(as is existing default behavior).
PreemptionPolicy is set to
pods in that PriorityClass will be non-preempting.
The use of the
PreemptionPolicy field requires the
to be enabled.
An example use case is for data science workloads.
A user may submit a job that they want to be prioritized above other workloads,
but do not wish to discard existing work by preempting running pods.
The high priority job with
PreemptionPolicy: Never will be scheduled
ahead of other queued pods,
as soon as sufficient cluster resources “naturally” become free.
Example Non-preempting PriorityClass
apiVersion: scheduling.k8s.io/v1 kind: PriorityClass metadata: name: high-priority-nonpreempting value: 1000000 preemptionPolicy: Never globalDefault: false description: "This priority class will not cause other pods to be preempted."
After you have one or more PriorityClasses, you can create Pods that specify one
of those PriorityClass names in their specifications. The priority admission
controller uses the
priorityClassName field and populates the integer value of
the priority. If the priority class is not found, the Pod is rejected.
The following YAML is an example of a Pod configuration that uses the PriorityClass created in the preceding example. The priority admission controller checks the specification and resolves the priority of the Pod to 1000000.
apiVersion: v1 kind: Pod metadata: name: nginx labels: env: test spec: containers: - name: nginx image: nginx imagePullPolicy: IfNotPresent priorityClassName: high-priority
Effect of Pod priority on scheduling order
When Pod priority is enabled, the scheduler orders pending Pods by their priority and a pending Pod is placed ahead of other pending Pods with lower priority in the scheduling queue. As a result, the higher priority Pod may be scheduled sooner than Pods with lower priority if its scheduling requirements are met. If such Pod cannot be scheduled, scheduler will continue and tries to schedule other lower priority Pods.
When Pods are created, they go to a queue and wait to be scheduled. The scheduler picks a Pod from the queue and tries to schedule it on a Node. If no Node is found that satisfies all the specified requirements of the Pod, preemption logic is triggered for the pending Pod. Let’s call the pending Pod P. Preemption logic tries to find a Node where removal of one or more Pods with lower priority than P would enable P to be scheduled on that Node. If such a Node is found, one or more lower priority Pods get evicted from the Node. After the Pods are gone, P can be scheduled on the Node.
User exposed information
When Pod P preempts one or more Pods on Node N,
nominatedNodeName field of Pod
P’s status is set to the name of Node N. This field helps scheduler track
resources reserved for Pod P and also gives users information about preemptions
in their clusters.
Please note that Pod P is not necessarily scheduled to the “nominated Node”.
After victim Pods are preempted, they get their graceful termination period. If
another node becomes available while scheduler is waiting for the victim Pods to
terminate, scheduler will use the other node to schedule Pod P. As a result
nodeName of Pod spec are not always the same. Also, if
scheduler preempts Pods on Node N, but then a higher priority Pod than Pod P
arrives, scheduler may give Node N to the new higher priority Pod. In such a
case, scheduler clears
nominatedNodeName of Pod P. By doing this, scheduler
makes Pod P eligible to preempt Pods on another Node.
Limitations of preemption
Graceful termination of preemption victims
When Pods are preempted, the victims get their graceful termination period. They have that much time to finish their work and exit. If they don’t, they are killed. This graceful termination period creates a time gap between the point that the scheduler preempts Pods and the time when the pending Pod (P) can be scheduled on the Node (N). In the meantime, the scheduler keeps scheduling other pending Pods. As victims exit or get terminated, the scheduler tries to schedule Pods in the pending queue. Therefore, there is usually a time gap between the point that scheduler preempts victims and the time that Pod P is scheduled. In order to minimize this gap, one can set graceful termination period of lower priority Pods to zero or a small number.
PodDisruptionBudget is supported, but not guaranteed
A Pod Disruption Budget (PDB) allows application owners to limit the number of Pods of a replicated application that are down simultaneously from voluntary disruptions. Kubernetes supports PDB when preempting Pods, but respecting PDB is best effort. The scheduler tries to find victims whose PDB are not violated by preemption, but if no such victims are found, preemption will still happen, and lower priority Pods will be removed despite their PDBs being violated.
Inter-Pod affinity on lower-priority Pods
A Node is considered for preemption only when the answer to this question is yes: “If all the Pods with lower priority than the pending Pod are removed from the Node, can the pending Pod be scheduled on the Node?”
Note: Preemption does not necessarily remove all lower-priority Pods. If the pending Pod can be scheduled by removing fewer than all lower-priority Pods, then only a portion of the lower-priority Pods are removed. Even so, the answer to the preceding question must be yes. If the answer is no, the Node is not considered for preemption.
If a pending Pod has inter-pod affinity to one or more of the lower-priority Pods on the Node, the inter-Pod affinity rule cannot be satisfied in the absence of those lower-priority Pods. In this case, the scheduler does not preempt any Pods on the Node. Instead, it looks for another Node. The scheduler might find a suitable Node or it might not. There is no guarantee that the pending Pod can be scheduled.
Our recommended solution for this problem is to create inter-Pod affinity only towards equal or higher priority Pods.
Cross node preemption
Suppose a Node N is being considered for preemption so that a pending Pod P can be scheduled on N. P might become feasible on N only if a Pod on another Node is preempted. Here’s an example:
- Pod P is being considered for Node N.
- Pod Q is running on another Node in the same Zone as Node N.
- Pod P has Zone-wide anti-affinity with Pod Q (
- There are no other cases of anti-affinity between Pod P and other Pods in the Zone.
- In order to schedule Pod P on Node N, Pod Q can be preempted, but scheduler does not perform cross-node preemption. So, Pod P will be deemed unschedulable on Node N.
If Pod Q were removed from its Node, the Pod anti-affinity violation would be gone, and Pod P could possibly be scheduled on Node N.
We may consider adding cross Node preemption in future versions if there is enough demand and if we find an algorithm with reasonable performance.
Pod priority and pre-emption can have unwanted side effects. Here are some examples of potential problems and ways to deal with them.
Pods are preempted unnecessarily
Preemption removes existing Pods from a cluster under resource pressure to make
room for higher priority pending Pods. If you give high priorities to
certain Pods by mistake, these unintentionally high priority Pods may cause
preemption in your cluster. Pod priority is specified by setting the
priorityClassName field in the Pod’s specification. The integer value for
priority is then resolved and populated to the
priority field of
To address the problem, you can change the
priorityClassName for those Pods
to use lower priority classes, or leave that field empty. An empty
priorityClassName is resolved to zero by default.
When a Pod is preempted, there will be events recorded for the preempted Pod. Preemption should happen only when a cluster does not have enough resources for a Pod. In such cases, preemption happens only when the priority of the pending Pod (preemptor) is higher than the victim Pods. Preemption must not happen when there is no pending Pod, or when the pending Pods have equal or lower priority than the victims. If preemption happens in such scenarios, please file an issue.
Pods are preempted, but the preemptor is not scheduled
When pods are preempted, they receive their requested graceful termination period, which is by default 30 seconds. If the victim Pods do not terminate within this period, they are forcibly terminated. Once all the victims go away, the preemptor Pod can be scheduled.
While the preemptor Pod is waiting for the victims to go away, a higher priority Pod may be created that fits on the same Node. In this case, the scheduler will schedule the higher priority Pod instead of the preemptor.
This is expected behavior: the Pod with the higher priority should take the place of a Pod with a lower priority. Other controller actions, such as cluster autoscaling, may eventually provide capacity to schedule the pending Pods.
Higher priority Pods are preempted before lower priority pods
The scheduler tries to find nodes that can run a pending Pod. If no node is found, the scheduler tries to remove Pods with lower priority from an arbitrary node in order to make room for the pending pod. If a node with low priority Pods is not feasible to run the pending Pod, the scheduler may choose another node with higher priority Pods (compared to the Pods on the other node) for preemption. The victims must still have lower priority than the preemptor Pod.
When there are multiple nodes available for preemption, the scheduler tries to choose the node with a set of Pods with lowest priority. However, if such Pods have PodDisruptionBudget that would be violated if they are preempted then the scheduler may choose another node with higher priority Pods.
When multiple nodes exist for preemption and none of the above scenarios apply, the scheduler chooses a node with the lowest priority.
Interactions between Pod priority and quality of service
Pod priority and QoS classQoS Class (Quality of Service Class) provides a way for Kubernetes to classify pods within the cluster into several classes and make decisions about scheduling and eviction.
are two orthogonal features with few interactions and no default restrictions on
setting the priority of a Pod based on its QoS classes. The scheduler’s
preemption logic does not consider QoS when choosing preemption targets.
Preemption considers Pod priority and attempts to choose a set of targets with
the lowest priority. Higher-priority Pods are considered for preemption only if
the removal of the lowest priority Pods is not sufficient to allow the scheduler
to schedule the preemptor Pod, or if the lowest priority Pods are protected by
The only component that considers both QoS and Pod priority is kubelet out-of-resource eviction. The kubelet ranks Pods for eviction first by whether or not their usage of the starved resource exceeds requests, then by Priority, and then by the consumption of the starved compute resource relative to the Pods’ scheduling requests. See evicting end-user pods for more details.
kubelet out-of-resource eviction does not evict Pods wheir their usage does not exceed their requests. If a Pod with lower priority is not exceeding its requests, it won’t be evicted. Another Pod with higher priority that exceeds its requests may be evicted.
- Read about using ResourceQuotas in connection with PriorityClasses: limit Priority Class consumption by default
Was this page helpful?
Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it on Stack Overflow. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.